Pull Out Cabinet Organizer,Heavy-Duty Slide Out Shelf, Wood and Wire Basket, Pull Out Drawer for for Kitchen Under Sink Space, Pantry, Bathroom, 2 Tie 14 * 21 in

Great product, unlike the instruction (insights in review)
Advantages:- BASKET FRAMEWORK: ease of installation, ability to remove board for cleaning.- REMOVABLE BOARDS: keeps things from dropping through, level- GENERAL CONSTRUCTION: easy glide rails, solid frame. I think most of the anchoring is at the bottom and the rear brackets on the upper rails are primarily for lateral stability of the upper rails.How the instructions could be better:Read ahead of time, but even then there are details that could have been included to make it more helpful.1) Measure what you’re going to place in each set of rails ahead of time.I initially chose the lowest holes for the bottom tray and highest holes for the upper tray. I turns out the pots I placed in the lower tray would have been fine with the upper rails in the lower set of upper holes. This eventually led me to remove the unit after assembly, move the upper rails, and reinstall. This is a good example of measure twice, cut (or install) once.2) Sliding rails are installed *inside* the brackets.There are left and right versions.Use the shorter set of screws.The hooks on the insides of the rails are oriented up because they support the wire racks.As longs as all the rails open in the same direction, you’re good.The screws are inserted from the inside; to attach the forward screws you need to position the rails to align openings.3) If you want to be doubly sure regarding step 1, insert the wire racks to the rails and load up whatever you plan to store.Moving the rails is easy at this point, not so much later. Remove the wire racks for installation of the frame if you prefer to do this step.4) Position the template as described, however only mark the center holes.It is excellent for depth. However, I found the template to be slightly off for the outer holes and wish I’d used the frame itself as a guide for the outer holes. I used a spring-loaded center hole punch and it marked the laminate just fine.6) Predrill the center holes.This will stabilize the rack for marking the lateral and rear holes.6) Place the rear stabilizing brackets on the rear of the upper rails.It’s going to be impossible to position those after the unit is inside the cabinet space. This one I actually figured out ahead of time.7) Place the unit inside the cabinet space and attach using the center screws.8) Mark the lateral and rear support holes.Yup, you’re going to remove the unit to predrill the holes. Unless you are a contortionist with with 11/10 core strength, in which case have at it.9) Predrill the holes.A 5/32 worked well, which is slightly under 5 mm. I discovered the rear panel was thin with a gap before more solid wood was encountered, so this alerted me to use longer screws (not included) for the rear supports.10) Think about your celebratory beverage.You’re almost there and it’s going to be awesome.11) Place the frame (with the rear brackets, without the wire racks) in the space and screw everything down. If using a drill set the ratchet at a low torque. I also figured that one out, maybe based on over torquing on other projects.12) Attach from plates to wire racks.Use the longer set of screws. No tricks, obvious what aligns with the dip in front.13) Attach the wire racks to each set of rails.You may need to apply pressure for them to seat.14) Place wooden boards inside the wire racks.They only align one way.15) Load with pots, pans, lids, etc16) see #10Hope this helped. I’m going to order another set and installation should be easier this time.

Superb product
This is top tier stuff! Easy to assemble and very sturdy. Loved it.

Good buy.
Felt like this was very pricey but I guess you get what you pay for. Very well made and hold a lot of weight. Makes my cabinet storage so much more functional.

Excellent pull out shelf unit, easy installation
I bought several of these for my kitchen in my lake house. They are very easy to install and good quality construction. I have used more expensive pullout shelf units in other kitchens and these are just as good. I just installed them so I can’t comment on their longevity but I don’t expect to have any issues. A very good value for the price.

Pour le prix, wow

Absolutely love it! Sturdy and beautiful! Only takes minutes to set up! Definitely recommend